Overall Dimensions: see the Marquis Vantage manual drawing; tested alcove 58 in. W x 48 in. D x 71-1/2 in. H minimum, per Marquis
The Marquis Vantage MQFDV453 is a freestanding direct vent gas stove with a bay-style front and triple-pane glass, so the fire is visible from the front and both angles. It is rated 23,750 to 34,500 BTU/h on natural gas, enough to heat a sizable room, and sits directly on carpet, tile or wood with no floor protection required.
Choose a millivolt standing pilot that works without power, or IPI with Proflame 1 or Proflame 2; Proflame 2 models add a remote with flame, fan, thermostat and smart thermostat control.
Key Specifications
| Models |
MQFDV453N / NE / NE2 (natural gas), MQFDV453LP / LPE / LPE2 (propane) |
| Input, natural gas |
23,750 to 34,500 BTU/h |
| Input, propane |
24,500 to 31,000 BTU/h |
| Efficiency (FE) |
NG 65.89% millivolt / 67.72% IPI; LP 72.14% / 74.06% (per listing; brochure lists the IPI values) |
| Viewing area |
20 in. W x 16-15/16 in. H (per listing) |
| Glass |
Triple-pane bay glass on MQFDV453 models (FDV451 is single pane) |
| Venting |
Direct vent, 4 x 7 in. concentric (Kingsman Flex or approved rigid with adapter); 4 in. B-vent adapter available |
| Gas pressure |
NG manifold 3.5 in. w.c. high / 1.6 low; LP 10 high / 6.3 low |
| Certification |
ANSI Z21.88-2017 / CSA 2.33-2017, CSA 2.17-2017; bedroom and mobile home approved |
Dimensions and Cutout
| Clearances to combustibles |
36 in. front, 15-1/2 in. sides, 2-1/2 in. back, 71-1/2 in. floor to ceiling |
| Alcove (tested) |
48 in. deep maximum, 71-1/2 in. tall and 58 in. wide minimum |
| Vent limits |
4-1/2 ft minimum vertical; 45 ft maximum vertical; 20 ft horizontal with 7 ft vertical and one 90 degree elbow |
| Floor protection |
None required |
Features
- Bay-style front with triple-pane glass for a three-sided view
- Up to 34,500 BTU/h on natural gas
- Millivolt models run during a power failure with hi-low adjustment
- Proflame 2 remote with flame, fan, thermostat and smart thermostat control
- Dual burner system with realistic flame pattern
- Optional driftwood or oak log sets, liners and decorative media
- Approved for bedrooms and mobile homes
What Is Included and What You Will Need
- Included: Vantage stove in the selected fuel and control version; Proflame 2 models include the remote
- Required: 4 x 7 in. direct vent pipe and termination, gas line with shutoff; power for IPI models and the optional fan
- Optional: F45FK fan kit, log sets MQLOGF453 (driftwood) or MQLOGF452 (oak), liners, rocks, stones, cannonballs or ember glass, B-vent adapter
Installation Notes
A qualified gas installer must vent the Vantage with approved 4 x 7 in. concentric pipe inside the Marquis limits and keep the listed clearances; in a mobile home it must be grounded to the chassis.
Documentation
Frequently Asked Questions
Does it work in a power outage?
Millivolt models run without power with hi-low flame adjustment. IPI models need power for normal operation.
Does it need a hearth pad?
No. Marquis allows installation directly on carpet, tile or other combustible flooring.
What is the difference between MQFDV453 and FDV451?
The MQFDV453 has triple-pane bay glass; the FDV451 uses single-pane glass.
Can it go in a bedroom?
Yes. It is certified for bedroom or bed-sitting room installation where local code allows.
Related reading: Direct Vent Gas Fireplace Buying Guide and Gas Fireplace Cost Installed.
Warranty
Marquis lists a limited lifetime warranty on the Vantage; component terms and conditions are in the warranty section of the Vantage manual.