Overall Dimensions: 66-3/16" W x 19-1/4" D x 39-9/16" H
The Marquis Serene 60 (ZCVRB60) is a 60 inch linear direct vent gas fireplace from Marquis by Kingsman, built for living rooms and primary suites where a wide, low ribbon of flame is the focal point. Choose a millivolt or IPI valve system, and dress the burner with rocks, birch and driftwood, decorative stones, cannonballs or ember glass to set the look.
Key Specifications
| Model |
ZCVRB60N/NE (natural gas), ZCVRB60LP/LPE (propane); Proflame 2 model MQZCVRB60NE2 |
| Input |
NG 23,000 to 35,000 BTU/h; LP 28,000 to 35,000 BTU/h |
| Viewing Area |
61 1/8" x 19 15/16" |
| Venting |
Direct vent, top vent, 5" flex or 8" hard pipe |
| Gas Control |
Millivolt, IPI (Proflame 1) or IPI (Proflame 2 with remote) |
| Glass |
Tempered, bronze glass listed |
| Gas Inlet |
3/8" NPT |
| Efficiency (listing) |
FE 55.27% / 56.66% |
Dimensions and Cutout
| Overall |
66-3/16" W x 19-1/4" D x 39-9/16" H |
| Framing (manual) |
Header 39-3/4" above the bottom of the unit; 19-1/4" minimum cavity depth; 15-3/4" for a recessed cavity |
| Ceiling |
76" minimum from the bottom of the fireplace |
| Mantel |
Combustible mantel line 29-1/2" above the top of the opening |
| Island Install |
Top vent horizontal run must not exceed 20 ft |
Features
- Millivolt or IPI valve system operates during power failures (per listing)
- Proflame 2 models include a remote for flame, fan, thermostat, smart thermostat (Wi-Fi compatible) and non-dimmable LED lights
- Bronze glass
- Safety screen barrier
- Mobile home, bedroom and bed sitting room approved (per listing)
- Choice of rocks, birch and driftwood, decorative stones, cannonballs or ember glass
What Is Included and What You Will Need
- Per the manual: burner assembly, media tray, safety screen, nailing tabs and stand-offs. Decorative glass embers must be on the burner and media tray before operation. The manual lists log sets, liners, fan kit (Z46FK) and light kit (ULK64) as optional accessories, so confirm what ships with your configuration.
- Required: direct vent pipe, a firestop or attic insulation shield for vertical venting through the enclosure top, a gas line, and a grounded outlet for IPI and Proflame 2 models
- Optional: surround (ZCVRB60S1BL/SS), tile lip kit, remote and IPI controls
Installation Notes
Clearance to combustibles is 36 inches at the front and 0 inches at the back, sides, top and floor. Supply pressure: NG 5.5 / 7 / 10 in. w.c.; LP 11 / 11 / 13 in. w.c. (min / normal / max). Do not operate without the decorative glass or with the glass front removed. Gas and venting work must be done by a licensed installer.
Documentation
Frequently Asked Questions
What is the difference between millivolt, IPI PF1 and IPI PF2?
Millivolt keeps a standing pilot lit and can be upgraded by a dealer for full function remotes. IPI Proflame 1 is the basic intermittent pilot system, and IPI Proflame 2 adds a factory installed full function remote.
Does it need a vent pipe?
Yes. It is a direct vent fireplace that uses 5 inch flex or 8 inch hard pipe through the top vent.
Are the logs included?
The manual treats log sets as optional accessories, while decorative glass embers are required on the burner.
Warranty
Per the current listing, Marquis provides a 1-year limited warranty on parts and labor, with a lifetime warranty on the heat exchanger, combustion chamber and burner for the original owner. Confirm exact terms in the owner's manual.